UV-VIS Quartz Cuvettes 200-2500nm
Quartz Micro Cuvette, 10mm, 1.75ml, Pins can be inserted in the Side Wall, Glued
Select options
This product has multiple variants. The options may be chosen on the product page
Quartz Micro Flow Cell with PTFE Screw Connectors, 96ul, 30mm, 2 Windows, OCB
- This cuvette is a continuous flow cell for avoiding light, threaded interface, and good sealing, and can be directly connected to peristaltic pump, which is an ideal experimental effect
- OCB Cuvette, has high-temperature resistance, acid and alkali resistance, and organic solvent resistance.
- PTFE Connector has a long corrosion-resistant service life and little influence on the measured solvents.
Quartz Micro Flow Cell with Steel Connectors, 96ul, 30mm, ZD 8.5mm, 2 Windows, Glued
- This type of cuvette uses high-quality stainless steel as the joint, which has a long service time and little influence on the tested solution.
- Please note that the Glued cuvettes are only for neutral solvents and solutes and are suitable for use below 100°C. If you require cells that can withstand acids and bases, organic solvents, or environments exceeding 100°C, please get in touch with us for customized options with Powder Sintered or Optical Contact Bonding cuvette.
Quartz Thread Cuvette with Extra Height, 10mm, 4.5ml, Fully Sealed Cell, OCB
Quartz Thread Sample Cell with Screw Cap, 30mm, 20ml, 2 Windows, Powder Sintered
- Powder Sintered Cuvette with PTFE Screwed Cap has good sealing, is suitable for Organic Volatile Solution.
- In general, we use silicone gaskets by default, and we also have PTFE gaskets to for you choose from, the latter has stronger corrosion resistance, but the sealing will be slightly worse than the former.
- If you’d like to use it in an anaerobic experiment, please choose OCB Cuvette with PTFE Screw Cap.
Quartz Thread Sample Cell with Screw Cap, 30mm, 60ml, 2 Windows, Powder Sintered
- Powder Sintered Cuvette with PTFE Screwed Cap has good sealing, is suitable for Organic Volatile Solution.
- In general, we use silicone gaskets by default, and we also have PTFE gaskets to for you choose from, the latter has stronger corrosion resistance, but the sealing will be slightly worse than the former.
- If you’d like to use it in an anaerobic experiment, please choose OCB Cuvette with PTFE Screw Cap.
Standard Quartz Cuvette with Screw Cap, Fully Sealed, 10mm, 3.5ml, OCB
- OCB Cuvette with PTFE Screw Cap is suitable for anaerobic experiments.
- In general, we use silicone gaskets by default, and we also have PTFE gaskets to for you choose from, the latter has stronger corrosion resistance, but the sealing will be slightly worse than the former.
Select options
This product has multiple variants. The options may be chosen on the product page
